Log Messages

A023 Contact input change detection (err)

Message

a %1 detected at In%2

 

 

%1

Contact input change (front-edge rear-edge)

 

 

%2

Contact input terminal number (1-2)

Explanation

Input change at the contact input terminal In1/In2 has been detected. “front-edge” means change

 

from Off to On, “rear-edge” means change from On to Off, “pulse” means change from Off to On to

 

Off, and “notch” means change from On to Off to On. “pulse” and “notch” indicate a short On/Off

 

(shorter than approximately 100 ms) detected during On/Off period.

 

 

A201 Registered panorama image failure (warning)

Message

corrupt panorama image %1

 

 

%1

File name of the panorama image (e.g., camera1.jpg)

 

 

Explanation

A registered panorama image cannot be displayed.

Countermeasure

Register a correct panorama image.

 

 

Audio Server Messages

B001 Audio server start and stop (info)

Message

%1 wvaudio

 

 

%1

starting shutdown

Explanation

The Audio Server has started or stopped.

 

 

B011 Audio client start (info)

Message

[%1] %2 connected n=%3

 

 

%1

Client type (send recv)

 

 

%2

Client host IP address

%3

Total number of clients

 

 

Explanation

An audio client has been connected to the Audio Server.

 

 

B012 Audio client stop (info)

Message

[%1] %2 closed [%3]

 

 

%1

Client type (send recv)

%2

Client host IP address

 

 

%3

Disconnection type (active passive senderr)

Explanation

An audio client has been disconnected from the Audio Server.

 

 

B101 Abnormal request received (notice)

Message

%1 unusual request [%2]

%1Client host IP address

%2Error type (400 404 ...)

Explanation

A request has been rejected due to a command error (400) or parameter error (404).

B102 Client connection rejected (notice)

Message

%1 request denied [%2]

%1

Client host IP address

 

 

%2

Rejection type (41 43 ...)

 

 

Explanation

A client connection request has been rejected due to an authentication error (41), resource shortage

 

(43), specification of an unsupported codec (45), specification of an unsupported stream (46),

 

restriction on the number of clients (49), operation mode (4a).

 

 

Countermeasure

41: Check the user name, password, or user list. 43: Reconnect or reboot the camera. 45 - 46: Use

 

supported client software. 49: Check the number of clients. 4a: Check that use of the Audio Server

 

is allowed.

Appendix

4-5