Preset Setting Tool

7Model

The model of the camera connected is displayed.

8Camera Parameters

Use “Pan” and “Tilt” to specify the central angle for the pan and tilt ranges you want to set. Use “Zoom” to enter the angle for the field of view.

Camera Angles

Pan

Set the pan position of the camera.

Tilt

Set the tilt position of the camera.

Zoom

Set the angle of view of the camera.

BLC

Set the backlight compensation for the camera. Select “Off” or “On”.

Focus

Set the focusing mode for the camera. Select from “Auto”, “Auto (for domes)”, “Fixed at infinity”, and “Manual” (P.3-14).

9Get Value button

When the “Get Value” button is clicked, the current angle and focus position (for Manual mode) of the camera selected at the VB-C300 is retrieved as camera parameters.

!0 Apply button

Settings for current Presets are applied to the VB-C300, and you can proceed to the next Preset setting. At this stage, the edited settings are not yet saved to the VB-C300. Be sure to click “Save Preset Settings” to save the settings to the VB-C300.

!1 Preview button

The settings for camera parameters are reflected in the Preset Preview frame. The camera angle for the VB-C300 also switches to this Preset and you can confirm from the NC Viewer.

!2 NC Viewer button

Start the NC Viewer.

Use this button if you want to set presets while watching actual video image via the NC Viewer. Orient the camera toward the position for setting the preset using the NC Viewer, then click “Get Value”, and click “Apply” to set the preset.

!3 Status list

Displays the results of communication between this tool and the VB-C300. Warning messages are displayed in blue and error messages are displayed in red.

Edited contents will not be stored in VB-C300 at the stage when “Apply” is clicked. Note After confirming the edited content, be sure to click “Save Preset Settings” to save

the settings to the VB-C300.

Tools VBAdmin

2-11