Connecting to Camera

Specify a camera or select a camera from the Camera List when you start the NC Viewer.

You can switch from a connected camera to another camera, or open multiple NC Viewer windows and display separate cameras in them.

You can launch another NC Viewer window or switch to a viewer other than the VB-C300 by using the Viewer Switcher (→ P. 3-34).

Connecting to a Specified Camera

To connect to the camera ...

1. Choose “Connect” from the File menu bar.

2. A dialog box to select a camera appears.

NC

1 1

2

3

4 2

5

6 7

Enter connection settings and click “OK”.

Host Name

Enter the IP address or host name set on the camera (→ P.1-17).

User Name

Enter the user name to connect to the camera. Users can be authorized users registered on the camera (→ P.1-15) or administrator “root”.

and Viewer Switcher Viewer

3Password

Enter the password for the specified user name.

4HTTP Port

Enter the HTTP port number set on the camera (→ P.1-12). Use default setting (80) if you do not need to change.

5Send and receive audio

Check this box and connect a microphone and speaker with amp to the camera if you want to send and receive audio via the NC Viewer (→ P.3-23). Authorized User can only receive audio. You need other settings to transmit or receive audio (→ P.1-14).

6Remember password

Check this option to save the password.

7Option button

Click “Option” to open the Connection Setting Option dialog to register a camera. If you register a camera in this dialog, you can select the camera from the camera list box in the next sessions.

Check the Add to camera list option to enter the name of the camera in the Nickname text box. Click “OK” after entering information to register the camera. You can use up to 32 characters.

3-5