Overview of NC Viewer Operation

2.Click “Add” from the Camera List dialog.

3.A Register Camera (Add) dialog box to select a camera appears.

Enter connection settings and click “OK” to add the camera to the list.

1 Nickname

Enter a name for register a camera (You can use up to 32 alphanumeric characters).

2Host Name

Enter the IP address or host name set on the camera (→ P.1-17).

3User Name

Enter the user name to connect to the

camera. Users can authorized users registered on the camera (→ P.1-15) or

administrator “root”.

4Password

Enter the password for the specified user name.

5HTTP Port

 

NC

2

Viewerand

1

 

3

Viewer

4

 

5

Switcher

7

6

 

Enter the HTTP port number set on the camera (→ P.1-12). Use default setting (80) if you do not need to change.

6Send and Receive audio

Check this box and connect a microphone and speaker with amp to the camera if you want to send and receive audio via the NC Viewer (→ P.3-23). Authorized User can only receive audio. You need other settings to transmit or receive audio (→ P.1-14).

7Remember Password

Check this option to save the password.

If Administrator and Authorized User use the NC Viewer from the same PC, it is Note strongly recommended not to check the Remember Password option.

3-23