Overview of NC Viewer Operation

!1Scroll bar for tilt

Use this scroll bar to change the tilt angle (up/down) of the camera.

!2Scroll bar for zoom

Use this scroll bar to change zoom magnification.

Slide the knob upward to zoom in (toward the telephoto end) and downward to zoom out (to wide end).

!3Panorama Window button

Displays the Panorama window. Panorama image needs to be registered on the camera in advance. If no panorama image is registered, no image is displayed (→ P.2-4).

!4Camera Control Status window

Displays camera control status (“Camera control available”, “Camera control unavailable” or “Pause”).

!5Start/Stop Control button

Use this button to obtain/release camera control.

!6Backlight Compensation button

When switched on, it is effective on images that are dark due to backlight. Click this button again turns off the function.

!7Preset Selection box

You can control the camera using a preset which is added and saved in advance (→ P.2-9).

!8Scroll bar for pan

Use this scroll bar to change the pan angle (right/left) of the camera.

Items selected with buttons can also be selected from menu bar.

Tip

Panorama Window

The Panorama window appears when you click “Panorama Window”. You can click on the Panorama window or drag a yellow frame over the window to control the camera.

The black frame indicates the area where the center of the camera can move around. You cannot move the center of the camera out of this area.

The blue frame indicates the area currently captured when you do not have camera control.

The blue frame changes to yellow when you get camera control and indicates the area currently captured by the camera. You can drag the mouse pointer inside the yellow frame to pan or tilt the camera, or drag over the frame to zoom in or out.

3-8