Using the Administration Tools (Administration Tools)

You can perform the following settings on the Administration Tools Page.

●View, Reboot and Restore: Display and initialize the setting for the VB-C300.

▼Display and Execution

1

2

3

4

1View Log Events

View the historical log events of the VB-C300’s operation and connection status of NC Viewer (→ P.4-4).

2View Current Settings

Display a list of current settings.

3Reboot

Reboot the VB-C300.

4Restore Settings

Return all the settings of the camera except for the administrator password, network address setting method, IP address, subnet mask, default gateway address, date, time, and time zone to the factory default settings. The VB-C300 will be rebooted automatically after restoring the settings.

Never power off the camera while the restore operation is in progress. Powering

Note off before completion may prevent it from starting up properly.

Tip

● It is recommended to take a note of the current settings before using the Restore Settings option (→ P.4-12).

●You can initialize the settings using the Reset switch, however, note that all settings will be initialized (→ P.4-9).

1-20