Log Messages
●B103 Client forcibly disconnected (notice)
Message | %1 request denied [%2] |
|
|
%1 | Client host IP address |
|
|
%2 | Rejection type (41 43 ...) |
Explanation | Although connection was allowed at the start of session, the settings have been changed to ban |
| the client access and the client has been forcibly disconnected from the Audio Server (the rejection |
| types are the same as B102). |
|
|
●B301 Transmission audio device error (err)
Message | cannot use audio device for tx [%1 : %2] |
|
|
%1 | Error process (ld buff) |
%2 | Error number |
|
|
Explanation | An audio device error has been detected. |
Countermeasure | Reboot the Camera. If the problem persists, it is an Audio Device failure. Call for service. |
|
|
●B401 Audio device initialization failed (crit)
Message | audio device initialization error [%1] |
%1 | Error number |
|
|
Explanation | The Audio device failed to initialize itself. The Audio Server stops. |
Countermeasure | Reboot the Camera. If the problem persists, it is an Audio Device failure. Call for service. |
|
|
●B402 Audio Server initialization failed (crit)
Message | wvaudio initialization error [%1] |
|
|
%1 | Error number |
Explanation | The Audio Server failed to initialize itself. The Audio Server stops. |
|
|
Countermeasure | Reboot the Camera. If the problem persists, it is an Audio Server failure. Call for service. |
|
|
●B403 Setting change failed (crit)
Message | cannot set config [%1] |
|
|
%1 | Error number |
|
|
Explanation | Update of settings failed. The Audio Server stops. |
Countermeasure | Reboot the Camera. If the problem persists, it is an Audio Server failure. Call for service. |
|
|
●S004 System start and stop (info)
Message | %1 webview |
|
|
%1 | Start (starting) or stop (stopping) |
|
|
Explanation | This message indicates start or stop of the Video Server (webview). |
●S005 System setting changed (info)
Message | System settings updated |
|
|
Explanation | The settings have been changed without reboot. |
|
|
●H043 User specification error (notice)
Message | %1: user %2 not found: %3 |
%1 | Client host IP address |
%2 | User Name |
|
|
%3 | URL |
Explanation | An unknown user has been specified in user authentication. |
|
|