
Overview of NC Viewer
Administrator and Authorized User
Two types of users, Administrator and Authorized User can use the NC Viewer. Administrator is the root user who can use all the functions including the administration functions (e.g., White Balance and Night mode) of the
Authorized User is a normal user who can use a limited set of functions. Register Authorized User as directed in “Setting User Access Privileges (Access Control)” (→
Administrator can use the functions listed below.
Functions only available to Administrator
Corresponding button or menu | Function | |
External Device Input button | Display the external device input status | |
Administrator - External Device Input | ||
| ||
|
| |
External Device Output button | Operate External Device Output | |
Administrator - External Device Output | ||
| ||
|
| |
Control for Administrators button | Exposure/Night Mode Setting | |
Administrator - Control for Administrators | ||
| ||
|
| |
Shade Correction button | Setting Shade Correction | |
Administrator - Shade Correction | ||
| ||
|
| |
Microphone Setting button | Setting Sending Audio | |
View - Microphone | ||
| ||
|
| |
Administrator - White Balance | Setting White Balance | |
|
| |
Administrator - Setup Properties | Connection Settings/Camera Control/Display Option | |
|
|
Viewer NC Viewer and Switcher
When you connect to the
Start/Stop Control button
If you connect to the camera as Administrator, you can continue to have it forcibly
Note and Authorized User cannot get the camera control. After viewing, be sure to exit the viewer or click “Start/Stop Control” again to release the privilege.