If [Auto] is selected, the gutter margins are automatically adjusted based on the number of pages and paper thickness.
If [Correction Width] is selected, the gutter widths are adjusted based on a value you enter which specifies the difference in how far the edge of the most inner page and the edge of the most outer page come when sheets of paper are folded in half to make the booklet.
NOTE
This function is not available if 'Booklet' is set to [Off].
Pressing [
] increase the setting value by 0.001" (0.05 mm) each time the key is pressed. Pressing [ 
] decreases the setting value by 0.001" (0.05 mm) each time. Holding down either [ 
] or [ 
] continuously speeds up the value alteration.
If this setting is used in combination with the 'Offset Short Edge/Offset Long Edge' or 'Margin', the values of these three settings are added together.
3
Printer Settings Menu
Settings Menu |