5

How to Use the Direct Print Function

7 Specify the settings under [Print Settings] according to your preference.

Details of each menu are shown below.

[Copies]

This setting enables you to specify the number of copies

 

printed.

[Paper Size]

This setting specifies the output paper size.

 

š If [Auto] is selected, the most appropriate paper source is

 

selected according to the PDF file page size.

 

š If a setting other than [Auto] is selected, the file is printed so

 

that the orientation of the long edge of the PDF file page size

 

and the long edge of the selected paper matches.

 

If the PDF file page size exceeds the largest or smallest size of

 

the user defined paper, jobs are canceled. (They are not

 

included in the Prints count.)

[Paper Type]

This setting specifies the output paper type.

[Manual Feed]

This setting enables you to fix the paper feed source to manual

 

feed.

[Enlarge/Reduce If you select the checkbox, the selected page size is enlarged to Fit Paper Size] or reduced with the same ratio for both the length and width to

print within the printable area. However this function is not available if [Auto] is selected in [Paper Size].

5-12Printing Directly from the Remote UI