Checking and Changing Print Jobs

This section describes the procedures for the job processes listed below.šCanceling Print Jobs (See p. 2-12.)šCanceling All Operations (Reset Printer) (See p. 2-17.)šTemporarily Stopping Print Jobs (See p. 2-18.)šForm Feeding Print Data (See p. 2-21.)šSkipping an Error during Printing (See p. 2-25.)šPrinting Secured Documents (See p. 2-28.)šPrinting Encrypted Secured Documents (See p. 2-33.)

IMPORTANT

šYou can restrict the display of the System Monitor screen under the following conditions if "Display Status Before Authentication" in System Settings (from the Additional Functions screen) is set to [Off]. (The default setting is [On].)

When "Display Status Before Authentication" is set to [Off]

: Displayed

✗: Not Displayed

Login service

System Monitor screen

(Department ID

 

 

Print, Copy, Send, Fax,

 

Management, SSO, SDL,

Device Status screen

etc.)

and Receive screens

 

 

 

 

 

 

Before logging in

✗



 

 

 

After logging in





 

 

 

*Even if you set the 'Display Status Before Authentication' mode to [Off], access to the System Monitor screen is only restricted if a login service is set.

šYou can receive print jobs only for encrypted secured documents with this machine if "Only Allow Encrypted Secured Jobs" in System Settings (from the Additional Functions screen) is set to [On]. A job will be canceled and an error message displayed if a print job other than an encrypted secured print job is received. (The default setting is [Off].)

2

Handling Different Print Jobs

Checking and Changing Print Jobs

2-11