Canon 5050, 5055, 5065, 5075 manual 96

3

Printer Settings Menu

šWhen you are stapling paper in landscape orientation, the image orientation and the staple position may not match.

š[Staple+Collate] and [Staple+Group] are available for selection if the paper size is 11" x 17", LGL, LTR, LTRR, EXEC, A3, JIS-B4, A4, A4R, or JIS-B5. Available staple locations depend on paper size and image orientation, as shown.

✓: Available

✗ : Unavailable

Staple
Position	Corner	Double	Corner	Double	Corner	Double	Corner	Double	Capacity
Paper Size	(Upper-	(Top)	(Upper-	(Right)	(Lower-	(Bottom)	(Lower-	(Left)	(Sheets)
	Left)		Right)		Right)		Left)
11" ⋅ 17"	✓	✓	✓	✓	✓	✓	✓	✓	50
LGL	✓	✓	✓	✓	✓	✓	✓	✓	50
LTR	✓	✓	✓	✓	✓	✓	✓	✓	100
LTRR	✓	✓	✓*	✓	✓	✓	✓*	✓	50
A3	✓	✓	✓	✓	✓	✓	✓	✓	50
JIS-B4	✓	✓	✓	✓	✓	✓	✓	✓	50
A4	✓	✓	✓	✓	✓	✓	✓	✓	100
A4R	✓	✓	✓*	✓	✓	✓	✓*	✓	50
JIS-B5	✓	✓	✓	✓	✓	✓	✓	✓	100

*Will be stapled parallel to the edge of the paper.

šThe maximum number of sheets that can be stapled is 50 for LGL, LTRR, 11" x 17", A3, JIS-B4, and A4R, 100 for LTR, A4, and JIS-B5. If the number of sheets is greater than the limit, they will not be stapled.

šMake sure to select compatible settings when using Staple and Punch simultaneously. If conflicting settings are selected, such as the staple setting for the right side of the paper and the punch setting for the left, the machine will use neither Staple nor Punch.

3-28Settings Menu