NOTE
This menu is only displayed for selection when the Saddle Finisher-AD2 and the Document Insertion/Folding Unit-F1 are attached.
C-folded paper might be wrinkled depending on the type of paper and the operating environment.
You cannot use this function in combination with the following functions or operations.
-Booklet
-Saddle Stitch
-Transparency Interleaving
-[Rotate+Collate], [Rotate+Group], [Staple+Collate], or [Staple+Group] during Finishing
-Punch
-Creep Correction
-Cover, Sheet Insertion, Job Separator, Tab Paper
You can select C-Fold for the following paper sizes and types.
-Paper sizes: Letter-R, A4R
-Paper types: Plain Paper, Recycled Paper, Color Paper
The maximum number of sheets that can be output to the paper trays is 40.
Under normal conditions, the print surface when C-Folding is the front, however, by selecting [Face Up] in 'Face Up/Down', you can C-Fold with the print surface on the back (inside). When performing two-sided printing, the paper is C-Folded with both the front and back sides printed.
You can adjust the width to fold paper with [C-Fold Placement Adjustment] in Adjustment/Cleaning settings (from the Additional Functions screen). You should specify a value for this setting to adjust the folding width of C-folded paper to match the size needed to fit in an envelope, or to adjust the positioning of an image on C-folded paper to be visible through a window envelope. For details on this setting, see the Reference Guide.
