Mode Priority

None*, PS, PCL, and PDF1.5

This setting determines which personality should be used if a job is received without a specified command language or Direct Print data. 'Mode Priority' is used when the 'Personality' is set to [Auto].

None

This does not specify a preferred personality. If a job is received without a specified command language or Direct Print data, the current personality is used. The default setting is [None].

PS

This assigns priority to the PS personality.

PCL

This assigns priority to the PCL personality.

PDF1.5

This assigns priority to the PDF1.5 mode.

NOTE

This function is not available when printing in the UFR II mode.

Initialize

—

The menu settings can be reset to the factory defaults by initializing the printer settings.

If you select Initialize, the confirmation message <Is it OK to initialize the settings?> is displayed. If you select [Yes], the settings are initialized. If you select [No], the settings are not initialized.

IMPORTANT

Do not turn OFF the machine while the settings are being initialized, as doing so may damage the machine's memory.

3

Printer Settings Menu

Settings Menu

3-43