3

Printer Settings Menu

PDF1.5 Settings

Settings on this menu specify how to print PDF files that are sent directly to the machine using the Remote UI or command prompt.

NOTE

šThese settings are applicable only when printing in the PDF 1.5 mode of Direct Print.

šFor details on the Direct Print functions, see Chapter 5, "How to Use the Direct Print Function."

Enlarge/Reduce to Fit Size

On, Off*

This setting enlarges or reduces the original document to match the printable area of the paper size.

If [On] is selected, the document is reduced to a page size that fits the paper size if the page size specified in the PDF file is larger than the printable area of the paper size. Conversely, the original document is enlarged to a page size that fills the paper size if the page size specified in the PDF file is smaller than the printable area of the paper size.

NOTE

šIf you specify [Auto] in 'Paper Size' using the Remote UI, this setting is not applied.

šThe PDF file page size is enlarged or reduced with the same ratio for both the length and width.

Enlarge Print Area

On, Off*

This setting specifies whether to enlarge the printable area to the edge of the paper.

If [On] is selected, the printable area is enlarged to 0 mm from the top, bottom, left, and right edges of the paper. If the PDF file page aspect ratio is the same as the specified paper size, you can print without inserting any blank spaces on the edge of the paper.

If [Off] is selected, the printable area is reduced to 4 mm from the top, bottom, left, and right edges of the paper.

3-58PDF1.5 Settings