5

How to Use the Direct Print Function

[Hole Punch] * This setting allows you to punch holes in the printed-paper. Select the checkbox and one of either [Left], [Right], [Top], or [Bottom].

If you select both the staple and punch settings, specify the punch and staple settings so the positions match. If the positions do not match (for example, the staple position is on the right and the punch position is on the left), both settings are void and the paper is printed without either stapling or punching.

[Staple Position] * This setting specifies the staple position if [Staple] is selected in [Finishing].

šIf [Corner] is selected, you can select one of either [Top Left], [Top Right], [Bottom Left], or [Bottom Right].

šIf [Double] is selected, you can select one of either [Left], [Right], [Top], or [Bottom].

[Booklet] *

This setting enables you to prepare the printout for binding as

 

a booklet. Booklet printing is a process whereby two pages of

 

data are printed on the front and back of one page and it is

 

folded in half to create a book.

[Comment Print] This setting specifies whether to print annotations.

šIf [Auto] is selected, only the annotations specified for printing in the PDF file are printed.

šIf [On] is selected, all annotations are printed.

šIf [Off] is selected, no annotations are printed.

[Store In User

To store the data in a user box, select [Store In User Inbox] and

Inbox]

then select the destination user box.

[Document Name To store the data in a user box, you can specify the document

after Storing]

name.

 

The document name cannot exceed 24 characters.

*The settings and settings values displayed on the Remote UI differ depending on which options are attached.

5-14Printing Directly from the Remote UI