This machine supports the following three kinds of control commands:
QUFR II Mode

UFR (Ultra Fast Rendering) is printing technology developed by Canon. High-speed printing is made possible by sharing the processing of print data normally done by the machine with the computer.

QPCL Mode

PCL (Print Control Language), developed by Hewlett-Packard, is a command system for controlling page printers. Command versions supported by this machine are PCL5e and PCL6.

QPostScript Emulation Mode

PS (PostScript), developed by Adobe, is a command system for controlling page printers. This mode emulates the operation of a printer in conformance with PostScript. The command version supported by this machine is PostScript emulation 3.

IMPORTANT

šTo print in the above printer modes, a Printer Driver supported by this machine must be installed.

šIn the above printer modes, "Settings Menu" and either "UFR II Settings," "PCL Settings," or "PS Settings" are available from the touch panel display. For settings with these menus, see Chapter 3, "Printer Settings Menu."

Printing With Direct Print

Printing with Direct Print can also be done with this machine. Direct Print is a print function that enables you to send PS/EPS, TIFF/JPEG, and PDF format files without using a printer driver from the computer to the machine, which recognizes the file. Therefore, you can print without the need to open files.

You can specify PS/EPS, TIFF/JPEG, and PDF files to be printed from a Remote UI. You can print a PDF file by specifying the location on your computer or URL from the Remote UI.

You can also use the Direct Print function by entering a command (LPR command) in the command prompt.

1

Before You Start Using This Machine

Printing Flow With This Machine

1-3