Trying the Camera Out
• The current time is displayed if you wait too long in step 2 after pressing the <m> button before you press the <n> button. In this case, press the <m> button to dismiss the time display and repeat step 2.
•You can also change the display language by pressing the <n> button and choosing [Language 
] on the [3] tab.
• You can also set the display language by touching a language on the screen in step 3 and then touching it again.
Still Images | Movies |
Trying the Camera Out
Follow these instructions to turn the camera on, shoot still images or movies, and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions.
1 Turn the camera on.
zzPress the power button.
XXThe startup screen is displayed.
2Enter <A> mode.
zzSet the mode dial to <A>.
zzAim the camera at the subject. The camera will make a slight clicking noise as it determines the scene.
XXIcons representing the scene and image stabilization mode are displayed in the upper right of the screen.
XXFrames displayed around any detected subjects indicate that they are in focus.
21