Connecting to Web Services
2Choose a Web service.
zzPress the <o><p><q><r> buttons or turn the <7> dial to choose the icon of the destination Web service, and then press the <m> button.
zzWhen you have selected email, choose the recipient on the [Select Recipient] screen and press the <m> button.
3Connect to an access point.
zzPress the <o><p> buttons or turn the <7> dial to choose [Add an Access Point], and then press the <m> button.
XXA list of detected access points will be displayed in the [Access Point Connect] screen.
XXFor further instructions, see “Preparing to Register a Computer” (=56) or “Connecting to Access Points in the List” (=67).
XXFor instructions after connecting to an access point, see “Adjusting Settings for Using Web Services From CANON iMAGE GATEWAY” (=46).
•You can also configure this setting through
•When a connection destination is set using the Touch Actions setting
(=248), you can automatically access the function to connect to the last connected destination from the next time by just dragging on the screen without needing to perform the connection operation.
49