Connecting to a Computer
zzDouble click the connected camera icon. XXDriver installation will begin.
XXAfter driver installation is complete, and the camera and computer connection is enabled, the AutoPlay screen will be displayed. Nothing will be displayed on the camera screen.
zzProceed to “Using CameraWindow to Transfer Images to a Computer” (=69).
• If you chose [PIN Method] in step 5, a PIN code will be displayed on the screen. Be sure to set this code in the access point. Choose a device in the [Select a Device] screen. For further details, refer to the user guide included with your access point.
•To add multiple computers, repeat the above procedures starting from step 1.
•When finished adding computers, press the <n> button on the image transmission screen displayed after you connect to a computer in step 7. Choose [OK] after the confirmation message, and then press the <m> button.
• You can also configure this setting through
66