Protecting Images

•Protected images on a memory card will be erased if you format

the card (=267, 268).

• Protected images cannot be erased using the camera’s erasure function. To erase them this way, first cancel protection.

Choosing Images Individually

1Choose [Select].

zzFollowing step 2 on =236, choose [Select] and press the <m> button.

2Choose an image.

zzPress the <q><r> buttons or turn the <7> dial to choose an image, and then press the <m> button. [] is displayed.

zzTo cancel selection, press the <m> button again. [] is no longer displayed.

zzRepeat this process to specify other images.

3Protect the image.

zzPress the <n> button. A confirmation message is displayed.

zzPress the <q><r> buttons or turn the <7> dial to choose [OK], and then press the <m> button.

•Images will not be protected if you switch to Shooting mode or turn

the camera off before finishing the setup process in step 3.

• You can also select or clear images by touching the screen in step 2, and

you can access the confirmation screen by touching [].

•You can also protect images by touching [OK] on the screen in step 3.

237