Viewing

Still Images

Checking People Detected in Face ID

If you switch the camera to simple information display mode (=219), the names of up to five detected people registered in Face ID (=113) will be displayed.

Switch to simple information display mode and check.

zzPress the <p> button repeatedly until simple information display is activated, and then press the <q><r> buttons to choose an image.

zzNames will be displayed on detected people.

• If you do not want names to display on images shot using Face ID, press the <n> button, choose [Face ID Info] on the [1] tab, and then set [Name Display] to [Off].

Still Images

Checking the Focus

To check the focus of your shots, you can magnify the area of the image that was in the AF frame at the time of shooting.

1Access Focus Check.

zzPress the <p> button (=219).

XXA white frame is displayed where the AF frame was when the focus was set.

XXGray frames are displayed over faces detected later, in Playback mode.

XXThe portion of the image in the orange frame is magnified.

222