Connecting to a Computer

7Choose a computer to connect to.

zzChoose the computer to connect to, following steps 7 – 8 on =65. The computer is now added to the list.

• Up to 16 access points will be displayed. If no access points are detected, choose [Manual Settings] in step 4 to manually set an access point. Follow on-screen instructions and enter an SSID, security settings, and an encryption key.

•[***] is displayed for the encryption key in step 5 when the same access point is used to connect to another device. To use the same encryption key, choose [Next] (either press the <q><r> buttons or turn the <7> dial) and press the <m> button.

•To add multiple computers, repeat the above procedures starting from step 1.

• You can also configure this setting through touch-screen operations (=91).

68