Canon A50 manual Changing the Button Battery, Play images using the normal proce- dures

6.Play images using the normal proce- dures.

7.When you finish viewing, turn the camera Mode Dial to the L (Lock) position before disconnecting the cable from both devices.

•When you are using the +/- buttons to switch images, the display resolution will drop slightly until the next image appears.

Due to different video signals in other countries, the images may not display on the TV screen even

when connected.

Changing the Button Battery

If the Clock Not Set icon () flashes on the Display Panel, it means that the button battery charge is low and the date/time setting has been lost. Purchase a generic CR2016 lithium battery and exchange it for the spent battery with the following procedures.

•The button battery is pre-installed at the factory and may therefore expire earlier than its rated lifespan after the camera has been purchased.

•The Clock Not Set icon will continue to flash on the Display Panel until you set the date/time, even if you have changed the button battery. Always set the date/ time after changing the button battery. (p. 29)

Other Functions

91