OCustom White Balance
Custom white balance enables you to manually set the white balance for a specific light source for better accuracy. Perform this procedure under the actual light source to be used.
Up to five sets of Custom white balance data can be registered to the camera. You can also append a name (caption) to the registered Custom white balance data.
3Registering Custom WB
There are two ways to register Custom white balance data. You can either take a picture and register it, or register an image already saved in the card.
Record and register WB
1Select [Set Custom WB].
Under the [z1] tab, select [Set
Custom WB], then press <0>.
COPY2 Select the Custom WB number to be registered.
Press <0>.
Turn the <5> dial to select 1 to 5 for < *>, then press <0>. The Custom WB data will be registered under the selected number.
3Select [Record and register WB].
Turn the <5> dial to select [Record
and register WB], then press <0>. X The LCD monitor will turn off, and the selected number [ * ] will blink on the
top LCD panel.
138