3System Status Display
You can check the camera’s serial number, firmware version, and shutter release cycles on the screen. You can also check the status log for past Error and Caution messages.
Use this function to check the camera’s condition. If necessary, take the camera to your nearest Canon Service Center for maintenance to minimize camera problems in the future.
1
2
Select [System status display].
Under the [54] tab, select [System status display], then press <0>.
Check the system status.
You can check the serial number, firmware version, and shutter release cycles.
Check the Error and Caution Log
You can check the camera’s past errors, caution history, and the lens, flash, and battery used when the error or caution occurred.
3 Check the log.
In step 2, press the <B> button.
XThe camera’s status log will be displayed.
“Err **” is an error message. For the error messages, see page 388. “Caution **” is a caution message. For the caution messages, see the next page.
385