dTransferring Images to a Personal Computer

3Select the Images to be Transferred

Sel.Image

1 Select [Image transfer].

Under the [32] tab, select [Image transfer], then press <0>.

2 3

4

Select [Image sel./transfer].

Select [Image sel./transfer], then press <0>.

Select [Sel.Image].

Select [Sel.Image], then press <0>.

Select the images to be transferred.

Turn the <5> dial to select the image to be transferred, then press <0>. Turn the <5> dial to display <X> on the screen’s upper left, then press <0>.

If you press the <u> button and turn the <6> dial counterclockwise, you can select an image from a three-image display. To return to the single-image display, turn the <6> dial clockwise. To select other images to be transferred, repeat step 4.

To return to the screen in step 3, press the <M> button.

When [Sel.Image] is selected, you can check the image’s transfer status on the upper left of the screen: No mark: Not selected. X: Selected for transfer. l: Transfer failed. k: Transferred.

The procedures for [RAW+JPEG transfer] on page 314 and steps 1 to 4 above can also be performed while the camera is not connected to a personal computer.

315