XEditing the Movie’s First and Last Scenes

You can edit out the first and last scenes of a movie in 1-sec. increments.

1On the movie playback screen, select [X].

X The movie editing panel will be displayed at the bottom of the screen.

2Specify the part to be edited out.

Select either [U] (Cut beginning) or

[V] (Cut end), then press <0>. Tilt <9> to the left or right to see the previous or next frames. Holding it down will fast forward the frames. Turn the <5> dial for frame-by- frame playback.

After deciding which part to edit out, press <0>. The portion highlighted in blue on the top of the screen is what will remain.

3Check the edited movie.

Select [7] and press <0> to play back the portion highlighted in blue. To change the editing, go back to step 2.

To cancel the editing, select [2] and press <0>.

264