3Custom Function Settings
Viewfinder info. during exposure
You can enable or disable the viewfinder information displayed during the exposure.
OFF: Disable
ON: Enable
The viewfinder information will be displayed even during exposure. This is convenient when you want to check the exposure setting, number of possible shots, etc., during continuous shooting.
When the shooting mode is set to “Bulb”, the viewfinder information will not be displayed even if [Enable] is set.
LCD panel illumination during Bulb
You can set the LCD panel illumination behavior during Bulb exposures, such as whether it stays on during the exposure, and whether it turns off or stays on when the <U> button is pressed.
OFF: Off
When the Bulb exposure starts, the LCD panel illumination turns off. Pressing the <U> button during a Bulb exposure illuminates the LCD panel for 6 sec.
ON: On during Bulb
The LCD panel illumination remains on until the Bulb exposure ends. This is convenient when you are taking a Bulb exposure in low light and want to check the exposure time.
Recording card, image size setting
When you press the <H> button to select the card or set the image size, you can select to do it with the rear LCD panel or with the menu screen.
Rear LCD panel
You can press the <H> button and turn the <6> or <5> dial while looking at the rear LCD panel.
LCD monitor
When you press the <H> button, the [Record func+card/folder sel.] or [Img type/size] screen will appear. Pressing the button toggles between the two screens.
328