Charging the Battery

1 Connect the charger to a power outlet.

Connect the power plug to a power outlet, and connect the power cord to the charger.

When no battery is attached, all the indicator lamps will be off.

2 Remove the protective covers.

As shown in the illustration, detach the charger’s protective cover (provided) and the battery’s protective cover (provided).

3 Recharge the battery.

Slide the battery into the charger’s slot as shown by the arrow, and make sure it is securely attached.

You can attach the battery to slot A or B. X The battery will start recharging and

the green status lamp will blink.

X When the battery is fully charged, all three Charge level indicators will light up (50%/80%/100%).

It takes approx. 130 min. for LP-E4N and approx. 120 min. for LP- E4 to fully recharge a completely exhausted battery at 23°C/73°F. The time required to recharge the battery will vary greatly depending on the ambient temperature and the battery’s remaining capacity.

The LC-E4N charger cannot charge any battery other than the Battery Pack LP-E4N/LP-E4.

Depending on the battery’s condition, charge may not reach 100%.

30