Before You Start
3Setting the
To save battery power, the camera turns off automatically after a set time of idle operation elapses. If you do not want the camera to turn off automatically, set this to [Disable]. After the power turns off, you can turn on the camera again by pressing the shutter button or other buttons.
1Select [Auto power off].
Under the [52] tab, select [Auto power off], then press <0>.
2Set the desired time.
Select the desired setting, then press <0>.
Even if [Disable] is set, the LCD monitor will turn off automatically after 30 min. to save power. (The camera’s power does not turn off.)
3Setting the Image Review Time
You can set how long the image is displayed on the LCD monitor immediately after capture. To keep the image displayed, set [Hold]. To not have the image displayed, set [Off].
1 Select [Image review].
Under the [z3] tab, select [Image review], then press <0>.
2Set the desired time.
Select the desired setting, then press <0>.
If [Hold] is set, the image will be displayed until the auto power off time elapses.
57