3Checking the Battery Information

You can check the battery’s condition on the LCD monitor.

Select [Battery info.].

Under the [53] tab, select [Battery info.], then press <0>.

Battery model or household power source being used.

The battery level icon (p.39) is displayed together with the remaining battery capacity shown in 1% increments.

Shots taken with the current battery. The number is reset when the battery is recharged (p.30).

Battery’s recharge performance level is displayed in one of three levels.

(Green):

Battery’s recharge performance is fine. (Green):

Battery’s recharge performance is slightly degraded.

(Red):

Purchasing a new battery is recommended.

The use of a genuine Canon Battery Pack LP-E4N or LP-E4 is recommended. If you use any battery other than the Battery Pack LP-E4N or LP-E4, the camera’s full performance may not be attained or malfunction may result.

The shutter count is the number of still photos taken. (Movies are not counted.) If [Calibration is recommended when charging battery next time] is displayed, see page 32.

If for some reason, communication with the battery is not successful, [Use this battery?] will be displayed. Just select [OK] and you can continue shooting. However, the battery information screen might not appear.

360