Replacing the Date/Time Battery

The date/time (backup) battery maintains the camera’s date and time. Its service life is approx. 5 years. If the date/time is reset when camera is turned on, follow the procedure below to replace the backup battery with a new CR2025 lithium battery.

The date/time/zone setting will also be reset, so be sure to set the correct date/time/zone (p.40).

1

2

Set the power switch to <2>.

Remove the battery.

The backup battery is on the ceiling of the battery compartment.

3 Removecover. the back-up battery

Use a small screwdriver to loosen the screw and remove the cover.

Be careful not to lose the cover and screw.

4

(+)

5

 

6

Remove the battery.

Stick a piece of tape to the battery and take out the battery.

Install a new back-up battery.

The plus side of the battery must face up.

Attach the cover.

For the date/time battery, be sure to use a CR2025 lithium battery.

362