xShooting with the Touch Shutter 
You can focus and take the picture automatically just by tapping the LCD monitor screen. This works in all shooting modes.
1 Enable the touch shutter.
Tap [y] on the screen’s bottom left. Each time you tap the icon, it will toggle between [y] and [x]. When [x] is set, you can tap to focus and shoot.
When [y] is set, you can tap to select the point to focus. Then, press the shutter button completely to shoot.
2 Tap the screen to shoot.
Tap the face or subject on the screen. X At the point you tap, the camera will
focus in the AF method that was set
XWhen focus is achieved, the picture is taken automatically.
The picture is not taken if focus is not achieved. Tap the face or subject on the screen again.
Even if the drive mode is set to <i> (continuous shooting), single shooting will take effect. The touch shutter does not function when the view is magnified.
When [1: AE lock/AF] or [3: AE/AF, no AE lock] is set to [5: Shutter/AE
lock button] under [54: Custom Functions (C.Fn)], autofocusing does not take effect.
You can also enable the touch shutter by setting [Touch Shutter: Enable] under the [A3] tab.
To take a bulb exposure, tap the screen twice. The first tap on the screen will start the bulb exposure. Tapping it again will stop the exposure. Be careful not to shake the camera when tapping the screen. Even if [AF operation] is set to [Servo AF],
125