About the Lens Image Stabilizer

With Lenses other than EF-M (Equipped with a Switch)

Use the IS switch on the lens.

Set the STABILIZER switch to <1>.

Using the Image Stabilizer when Shooting

1

2

Press the shutter button halfway.

XThe Image Stabilizer will operate.

Take the picture.

When the picture looks steady on the LCD monitor, press the shutter button completely to take the picture.

The Image Stabilizer cannot correct “subject blur”, when the subject moves at the time of exposure.

For bulb exposures, set the IS to <2>. If <1> is set, Image Stabilizer incorrect operation may occur.

The Image Stabilizer may not be effective for excessive shaking such as on a rocking boat.

The Image Stabilizer works in all focus modes.

When the IS is set to <2>, will appear on the screen.

When using a tripod, you can still shoot with the IS set to <1> with no problem. However, to save battery power, setting the IS to <2> is recommended.

The Image Stabilizer is effective even when the camera is mounted on a monopod.

47