Handy Features
3Auto Rotation of Vertical Images
When you shoot a vertical image and view it with the camera or personal computer, it will be rotated automatically to the vertical orientation. You can change this setting.
Under the [51] tab, select [Auto rotate], then press <Q/0>. The available settings are described below. Select one, then press <Q/0>.
[OnzD] : The vertical image is automatically rotated during playback
| on both the camera’s LCD monitor and on the computer. |
[OnD] | : The vertical image is automatically rotated only on the computer. |
[Off] | : The vertical image is not automatically rotated. |
FAQ
The vertical image is not rotated during the image review immediately after it is captured.
The image will be rotated when you press the <x> button to play back images.
[OnzD] is set, but the image does not rotate during playback. Auto rotate will not work with vertical images captured while [Auto rotate] was set to [Off]. If the vertical image is taken while the camera is pointed up or down, the image may not be rotated automatically for playback. In such a case, rotate the image with the procedure explained in “Rotating the Image” on page 233.
On the camera’s LCD monitor, I want to rotate an image captured when [OnD] had been set.
After you take the picture, you can still set [OnzD] so that the image will be rotated during play back.
The vertical image does not rotate on the computer screen. The software used is not compatible with image rotation. Use the software provided with the camera instead.
214