
3Lens Peripheral Illumination / Chromatic Aberration Correction
Peripheral light
Peripheral Illumination Correction
1Select [Lens aberration correction].
Under the [A2] tab, select [Lens aberration correction], then press <Q/0>.
2Select the setting.
Check that [Correction data available] is displayed for the attached lens.
Select [Peripheral illumin.], then press <Q/0>.
Select [Enable], then press <Q/ 0>.
If [Correction data not available] is displayed, see “About the Lens Correction Data” on page 165.
3 Take the picture.
The image will be recorded with the peripheral illumination corrected.
Depending on shooting conditions, noise may appear on the image periphery.
The correction amount applied will be slightly lower than the maximum correction amount that can be set with Digital Photo Professional (provided software).
The higher the ISO speed, the lower the correction amount will be.
163