Handy Features

3Setting Power-saving Features (LCD auto off, Camera auto off)

If you do not operate the camera for a while, the LCD monitor will turn off automatically to save power. If you further leave the camera alone, the camera’s power will turn off automatically. You can set the time until when the LCD monitor turns off and when the camera’s power turns off automatically.

If the LCD monitor has turned off to save power, pressing any camera button or tapping the LCD monitor will turn it on again.

If the camera’s power has turned off to save power, you can turn it on again by pressing the power button or hold down the <x> button for at least 2 sec.

The Power/access lamp will blink when you set the power to <1> and turns off when you are using power. When the LCD monitor turns off, the Power/access lamp will turn green.

Under the [52] tab, select [Power saving], then press <Q/0>.

Select the desired setting for [LCD auto off] and [Camera auto off], then press <Q/0>.

[Camera auto off] is the auto off time after the LCD monitor turns off.

206