3Custom Function SettingsN

C.Fn-6 XLbutton function

You can assign a frequently-used function to the <XL> button. While the camera is ready to shoot, press <XL>.

0:Normal (set center AF point)

1:Depth-of-field preview

The aperture opening (diaphragm) changes only at the moment when the picture is taken. Otherwise, the aperture remains fully open. Therefore, when you look at the scene on the LCD monitor, the depth of field will look narrow.

Press the <XL> button to stop down the lens to the current aperture setting and check the depth of field (range of acceptable focus).

Even when the aperture is stepped down, the modeling flash of an external flash will not fire.

2:ISO speed

The ISO speed setting screen will appear. Press the <YA>/<ZO> button or turn the <5> dial to set the ISO speed.

3:Flash exposure compensation

Set flash exposure compensation if the flash exposure of the subject does not come out as desired. You can set the exposure compensation up to ±2 stops in 1/3-stop increments.

4:Incr LCD brightness (temp)

Pressing the <XL> button will set the LCD monitor brightness to the same level as the menu’s “7” setting. Press the button again and it will return to the previous brightness.

If the power turns <2> or the brightness adjustment screen is displayed with the menu, the previous brightness will return.

C.Fn-7 Release shutter w/o lens

0:Disable

When set to [Disable], not only the shutter button is disabled but the <o> (Movie start/stop) button will be disabled as well. Even if you press the button, movie recording will not start.

1:Enable

Even when no lens is attached to the camera, pressing the shutter button completely will release the shutter.

287