Turning on the Power

If you set the power to <1> and the time zone/date/time setting screen appears, see page 40 to set the time zone and date/time.

Pressing the power button toggles between <1> and <2>.

With the power <2>, holding down the <x> button for 2 sec. or longer will start the playback mode.

When an EF-M lens is attached to the camera and the power is off, the aperture stops down to shut out the light and protect the inside of the camera. When you set the power to <1> or <2>, the aperture makes a small noise as it opens.

About the Automatic Self-Cleaning Sensor

When you set the power to <1>/<2> or if [Camera auto off] takes effect and the camera turns off, the image sensor will be cleaned automatically (making a small noise). During the image sensor cleaning after intentionally turning the camera <2>, the LCD monitor will display <f>.

If you repeatedly switch the power to <1>/<2> at a short interval, the <f> icon may not be displayed. This is normal and not a problem.

The automatic self-cleaning of the image sensor can be enabled or disabled with the menu (p.225).

37