Installing and Removing the Battery and Card

Load a fully charged Battery Pack LP-E12 into the camera. The card (sold separately) can be an SD, SDHC, or SDXC memory card. SDHC and SDXC cards with UHS-I can also be used. The captured images are recorded onto the card.

Make sure the card’s write-protect switch is set upward to enable writing/erasing.

Installing the Battery and Card

1

2

Write-protect switch

3

Open the cover.

Slide the lever as shown by the arrows and open the cover.

Insert the battery.

The battery’s “Canon” logo must be toward the camera’s front side as you insert the battery with the battery contacts in first.

Insert the battery until it clicks and locks in place.

Insert the card.

The card’s label side must be toward the front of the camera. Insert it straight down until it stops.

34