Installing and Removing the Battery and Card
4 Close the cover.
Press the cover until it snaps shut. When you set the power to <1>, the number of possible shots (p.39) will be displayed on the LCD monitor.
Possible shots
Removing the Battery and Card
1Set the power to <2>.
2 Open the cover.
Make sure the LCD monitor and ower/access lamp are off, then
open the cover.
If [Recording...] is displayed, close the cover.
3 Remove the battery.
1. Press the battery release lever as shown by the arrow. 2. Remove the battery.
To prevent short circuiting of the battery contacts, be sure to attach the protective cover (provided, p.32) to the battery.
4 Remove the card.
Gently push in the card, then let go to eject it.
Pull the card straight out.
35