Using Eye-Fi Cards

5Check the [Access point SSID:].

Check that an access point is displayed for [Access point SSID:]. You can also check the Eye-Fi card’s MAC address and firmware version. Press the <M> button three times to exit the menu.

 

 

 

6 Take the picture.

 

 

 

X The picture is transferred and the

 

 

 

<H> icon switches from gray (not

 

 

 

connected) to one of the icons below.

 

 

 

For transferred images, Ois

 

 

 

displayed in the shooting information

 

 

 

display (p.256).

Transmission status icon

 

H(Gray) Not connected :No connection with access point. H(Blinking) Connecting :Connection with access point. H(Displayed) Connected : onnection to access point established.

H(  ) Transferring :Image transfer to access point in progress.

Cautions for Using Eye-Fi Cards

If “J” is displayed, an error occurred while retrieving the card information. Turn the camera’s power off and on again.

Even if [Eye-Fi trans.] is set to [Disable], it may still transmit a signal. In hospitals, airports, and other places where wireless transmissions are prohibited, remove the Eye-Fi card from the camera.

If the image transfer does not function, check the Eye-Fi card and personal computer settings. For details, refer to the card’s instruction manual.

Depending on the wireless LAN’s connection conditions, the image transfer may take longer or it may be interrupted.

Because of the transmission function, the Eye-Fi card may become hot. The battery power will be consumed faster.

During the image transfer, auto power off will not take effect.

295