Playing Back the Added Sound

You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust the balance of both sounds.

CAMERA

PLAY (VCR)

 

 

CARD CAMERA

CARD PLAY

 

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO SETUP

 

 

12bit AUDIO•••STEREO1

(

37)

1.Open the menu and select [AUDIO SETUP]. Select [12bit AUDIO], select a setting and close the menu.

STEREO1: Plays back the original sound.

STEREO2: Plays back the added sound.

MIX/FIXED: Plays back stereo 1 and stereo 2 in the same level.

MIX/VARI.: Plays back stereo 1 and stereo 2. The mix balance can be adjusted.

2.If you have selected [MIX/VARI.], adjust the mix level: Open the menu and select [AUDIO SETUP]. Select [MIX BALANCE], adjust the balance with the SET dial and close the menu.

Turn the SET dial down to increase the volume of Stereo 1 and up to increase the volume of Stereo 2.

The camcorder resets to [STEREO1] when you turn the camcorder off. However,

the mix balance is memorized by the camcorder.

You can also press the 12bit AUDIO OUT button on the wireless controller to select the audio output. However, the mix balance can only be adjusted in the menu.

E

Editing

91

Page 91
Image 91
Canon 9545A001AA, OPTURA40 instruction manual Playing Back the Added Sound