2.Select the print settings (
126).
3.Turn the SET dial to select [PRINT] and press the SET dial.
•Printing starts. The print setting menu disappears when printing is complete.
•If you wish to continue printing, select another still image with the CARD +/– button.
❍Observe the following precautions during printing, otherwise printing may not be performed correctly.
-Do not turn off the camcorder or the printer.
-Do not change the position of the TAPE/CARD switch.
-Do not detach the cable.
-Do not open the memory card cover or remove the memory card.
❍Images not recorded with this camcorder, uploaded from a computer, edited on a computer and images whose file names have been changed may not be printed correctly.
❍If the message “BUSY” does not disappear, disconnect the cable from camcorder and printer and reconnect the camcorder to the printer.
❍Cancel Printing
Press the SET dial during printing. A confirmation dialog appears. Select [OK] and press the SET dial.
-Canon Bubble Jet Printer: Printing stops even if it is incomplete and the paper is fed through.
-Canon
❍Printing Errors
If an error occurs during the printing process, an error message appears ( 
144).
-Canon Bubble Jet Printer: Resolve the error. When printing does not resume automatically, select [CONTINUE] and press the SET dial. If [CONTINUE] cannot be selected, select [STOP], press the SET dial and retry printing. Refer also to the printer manual for details.
-Canon
-If the error still persists and printing does not restart, follow below procedure:
1.Disconnect the cable.
2.Turn the POWER switch of the camcorder to OFF and back to PLAY (VCR).
3.Reconnect the cable.
❍When you have finished printing:
1. Disconnect the cable from the camcorder and printer.
2. Turn off the camcorder.
E 
Direct Printing
125
