Message | Explanation |
|
CANNOT TRIM | You attempted to trim an image with an image size of | |
| 160 ⋅ 120, or an image not recorded in the 4:3 ratio. | |
READJUST TRIMMING | You changed the print style after you set the trimming settings. | |
|
| |
PRINTER ERROR | Cancel printing. Turn off the printer and turn it back on. Check | |
| the printer status. |
|
|
| |
PRINT ERROR | Cancel printing, disconnect the USB cable and turn off the printer. | |
| After a while, turn the printer back on and reconnect the USB | |
| cable. Check the printer status. |
|
| When you are printing using the | button, check the print |
| settings. |
|
HARDWARE ERROR | Cancel printing. Turn off the printer and turn it back on. Check | |
| the printer status. |
|
|
|
|
RECHARGE THE | The printer battery is depleted. |
|
PRINTER BATTERY |
|
|
|
| |
COMMUNICATION | The printer is experiencing a data transmission error. Cancel | |
ERROR | printing, disconnect the USB cable and turn off the printer. After a | |
| while, turn the printer back on and reconnect the USB cable. | |
| When you are printing using the | button, check the print |
| settings. |
|
| Or, you attempted to print from a memory card that contains a | |
| large number of images. Reduce the number of images. | |
CHECK PRINT | The print setting cannot be used for printing with the | |
SETTINGS | button. |
|
PRINTER IN USE | The printer is in use. Check the printer status. | |
|
| |
PRINTER WARMING | Printer is warming up. If the message does not disappear after a | |
UP | few seconds, check the printer status. |
|
|
| |
PAPER LEVER ERROR | Paper lever error occurred. Adjust the paper selection lever to the | |
| proper position. |
|
PRINTER COVER OPEN | Close the printer cover securely. |
|
|
| |
NO PRINTHEAD | No print head is installed in the printer or print head is defect. | |
| Refer to the instruction manual of your printer. | |
|
|
|
E
Information | Additional |