SETTINGS & TOOLS

NOTES

The Location setting is set to E911 Only by default, and detection of the phone’s current location using GPS is disabled. To enable location detection with G’zGEAR®, Location must be set to On.

For instructions on how to set Location to On, see page 155.

From idle mode, you can directly access the G’zGEAR® by pressing and holding the G’zGEAR Key .

G’zGEAR® does not end automatically. When you do not use G’zGEAR®, be sure to press the End/Power Key to end G’zGEAR®.

Earth Compass

In Compass mode, the direction measured with the built-in electronic compass is displayed.

In World Nature mode, the compass and natural objects in the direction the handset is facing are displayed on the screen.

In Customizable Compass mode, the compass and user created points in the direction the handset is facing are displayed on the screen.

1.From idle mode, press the Center Select Key [MENU], select Settings & Tools, then press the Center Select Key [OK]. Press

Tools.

2.Select G’zGEAR, then press the Center Select Key [OK], 

Earth Compass.

3.The following keys are available in the Earth Compass:

• Directional Key

left or right: Switches the mode.

Directional Key up or down: Selects the natural object in the direction the handset is facing to measure the distance to that object. (Only in World Nature mode)

Directional Key up or down: Selects the user created point in the direction the handset is facing to measure the distance to that point. The selected point can be edited or erased by pressing the Center Select Key [EDIT]. (Only in Customizable Compass mode)

118

Page 119
Image 119
Casio Ravine manual Earth Compass, 118, Tools, Select G’zGEAR, then press the Center Select Key OK,