CONTACTS

Phone Numbers with Pauses

Pauses are used for automated systems (e.g. voicemail or calling cards). Insert a pause after a set of numbers then enter another set. The second set of numbers is dialed after the pause. This feature is useful for dialing into systems that require a code. There are two different types of pauses you can use when registering a phone number:

Wait (W): The handset stops dialing until you press the Left Soft Key [Release] to advance to the next number.

2-Sec Pause (P): The handset waits 2 seconds before automatically dialing the next set of numbers.

Registering a Phone Number with Pauses

1.From idle mode, enter the phone number.

2.Press the Right Soft Key [Options], then press Add 2-Sec Pause or Add Wait.

3.Enter the additional number(s) (e.g. PIN number or credit card number).

4.Press the Left Soft Key [Save], then press Add New Contact.

5.Complete any additional fields and press the Center Select Key [SAVE].

Accessing the Contacts submenu

1.From idle mode, press the Center Select Key [MENU], select Contacts, then press the Center Select Key [OK].

2.Select a submenu:

New Contact/Contact List/Groups/New PTT Contact*/PTT Contact List*/PTT Groups*/Backup Assistant/Speed Dials/In

Case of Emergency/My Name Card

* These options are available only when the PTT feature is turned on.

48

Page 49
Image 49
Casio Ravine manual Phone Numbers with Pauses, Accessing the Contacts submenu, Registering a Phone Number with Pauses