Phone Only: Allows you to edit the Lock Code for the handset

only.

Calls & Services: Allows you to edit the Lock Code for all Calls & Services.

5.Enter the new four-digit code in the Enter New Code field.

If you selected Calls & Services in step 4, you would also need to enter the current code before entering the new code.

6.Press the Directional Key down to advance to the Re-enter New Code field.

7.Enter the new four-digit code again as confirmation.

8.Press the Center Select Key [SET].

NOTE

There are two Lock Codes: Phone Only and Calls & Services.

IRestrictions

Use the following procedure to configure Location Setting, Calls, Messages, and Dial-Up Modem restrictions.

1.From idle mode, press the Center Select Key [MENU], select

Settings & Tools, then press the Center Select Key [OK]. Press

Phone Settings,

Security.

2.Enter the four-digit Lock Code. The default Lock Code is the last 4 digits of your mobile telephone number.

3.Press Restrictions.

4.Enter the four-digit Lock Code.

5.Select one of the following settings and then press the Center Select Key [OK].

Location Setting: Unlock Setting/Lock Setting

Calls: Incoming Calls/Outgoing Calls

For Incoming Calls, set Allow All/Contacts Only/Block All. For Outgoing Calls, set Allow All/Contacts Only/Block All.

SETTINGS & TOOLS

157

Page 158
Image 158
Casio Ravine manual 157, Press Restrictions