Table B-1. Ethernet Interface Default Settings. (continued)
Active Connection |
|
Active Connection | None |
Telnet Mod | N/A |
Terminal Type | N/A |
Remote Port | N/A |
Connection Response | None |
Modem Emulation Mode | None |
Use Host List | N/A |
Remote Host | N/A |
|
|
Disconnection |
|
Disconnect with EOT | N/A |
Disconnect with DTRDrop | False |
Disable Hard Disconnect | False |
Inactivity Timeout | 00:00 |
|
|
Connection |
|
Connection LED | Blink |
|
|
Buffer Flushing |
|
Flush Output Buffer |
|
- At Time of Disconnect | False |
- On Passive Connection | True |
- On Active Connection | False |
Flush Input Buffer |
|
- At Time of Disconnect | False |
- On Passive Connection | True |
- On Active Connection | False |
|
|
Packing |
|
Enable Packing | True |
Send Trailing Bytes | None |
Send Frame Only | False |
Match Two Byte Sequence | False |
Idle Time | Force Transmit 12ms |
Match Byte 2 | 00 |
Match Byte 1 | 00 |
|
|
Device |
|
Firmware Type | N/A |
Firmware Version | N/A |
Product Type | N/A |
